Card Making Techniques - Waterfall Card. Part of Card Inspirations series of techniques showing different card making ideas and methods.
Let us know if you would like to see more card making or scrapbooking techniques at [email protected]
Five decorative card squares are mounted on a sliding strip. When the tab is pulled they open like the leaves of a book. This card uses stitched designs from the Form-A-Lines flower squares kit.
Equipment and materials used to make this card.
- Greetings card hammered white double fold 69 mm x 184 mm.
- Sheet of hammered white card A4
- Sheet of thin white card A4
- Form-A-Lines flower squares kit
- Thread in colours of your choice
- Embossing tool
- Metal ruler
- Score board (optional)
- Craft knife and cutting mat
- Eylet and equipment to fix it
- Ribbon
- Double-sided tape
Method
Prepare five decorated squares of card 60 mm x 60mm. The ones in the illustration have been made from designs in the Form-A-Lines flower squares stitching kit. Back the squares with thin card to hide the stitch work.
Cut a strip of card 60 mm x 270 mm. Turn the card strip face down. Use an embossing tool and ruler or score board to create fold lines. Fold A is 150 mm from the left-hand edge. Add four more fold lines at 15 mm intervals using the illustration as a guide.
Add a strip of double-sided self adhesive tape to the right of fold E. Use this to mount a decorated square in place. Add another strip of double-sided self adhesive tape to the right of fold D. Add another square.
Continue to add squares until all five are in place. Fold the card under at line A.
Add an eyelet to the end of the strip using the finished illustration as a guide. Add a piece of ribbon.
Lay the blank greetings card face up on a cutting mat. Cut slits at F and G using a craft knife and a metal ruler. Slit F is 120 mm from the left-hand edge. They are about 20 mm apart. Add a strip of double-sided adhesive tape between the two slits. Leave the top of the tape covered.
Slot the ribbon end of the strip in at slit F and out at slit G. Adjust the position using the finished illustration as a guide. Fix the end of the strip that is covered by the decorated squares with the double-sided self adhesive tape added earlier at F.
Fold the lower panel of the card in and secure with double-sided adhesive tape. This hides the back of the slot.
An alternative design using images from Form-A-Lines Christmas kit 13. The size of the squares are adapted to suit the images.
The waterfall card technique is demonstrated by David Jefferson.
The photographs are by David Jefferson and are copyright 2006.
All materials used are copyright to their respective producers and used with kind permission. |